Engine
Packages Available
625
650
675
750
800
925
1000
1200
6 month
warranty!!
|
SC 1000 HP
Specifications
- 600 cubic inch displacement
- 4.500 inch stroke
- 4.600 inch bore
- 9:1 compression
- 1000 H.P. @ 6,200 RPM
- Super Unleaded 93 Octane
- Twin 4 Barrel 1050 CFM carburetor (Holley)
- Blueprinted and balanced
- 18 Degree Big Chief Aluminum Heads fully ported
- Brodix aluminum cylinder heads, fully ported & flowed
- 17 Quart custom designed oil pan
- Dart Merlin Block (Tall Deck)
- Solid Roller cam shaft
- Thunder Bolt electronic ignition
- Dual oil cooler bell housing
- Stainless Steel Cobra water inlets & outlets
- Race quality components and assembly
- Mooneyham 1071 Supercharger
Dimensions (without manifolds)
For Side-By-Side Installation...Minimum 35” Centerline
Width (head on)...............................................26”
Height (from crank shaft to flame arrestor).........32”
Height (fromoil pan to carburetor).....................42”
Length (with borg warner direct drive gear)......46”
|
SC 1200 HP
Specifications
- 700 cubic inch displacement
- 5.250 inch stroke (Lunati 4340 Internal Balance)
- 4.600 inch bore (Venolia Pistons)
- 8:1 compression
- 1200 H.P. @ 5,700 RPM
- Regular gas (Leaded or Unleaded) 92 Octane
- Twin 4 barrel 1050 CFM carburetor (Holley)
- Blueprinted and balanced
- Brodix aluminum cylinder heads, fully ported & flowed
- 17 Quart custom designed oil pan
- Dart Merlin block (super tall deck)
- Crane solid roller cam shaft
- Lee intercooler
- Crane electronic ignition with built in Rev-limiter
- Dual oil cooler bell housing
- Stainless Steel Cobra water inlets & outlets
- Race quality components and assembly
- BDS 1671 Supercharger
Dimensions (without manifolds)
For Side-By-Side Installation......Minimum 35” Centerline
Width (head on).................................................27”
Height (from crank shaft to flame arrestor)...........37”
Height (fromoil pan to carburetor).......................47”
Length (with borg warner direct drive gear)........46”
|
|
|
750 HP
Specifications
- 600 cubic inch displacement (Dart Block)
- 4.500 inch stroke
- 4.600 inch bore
- 9:1 compression
- 750 H.P. @ 5,600 RPM
- Regular / Unleaded 92 Octane
- Holley 1050 CFM carburetor
- Blueprinted and balanced
- Dart heads fully ported and flowed
- 17 Quart custom designed oil pan
- Dart Merlin Block (tall deck)
- Steel Billet Crower connecting rods
- Thunder Bolt electronic ignition
- Stainless Steel water inlets and outlets
- Race quality components and assembly
Dimensions (without manifolds)
For side-by-side installation..minimum 34” centerline
Width (head on)...........................................26”
Height (from crank shaft to flame arrestor).....29”
Height (from oil pan to carburetor)................39”
Length (with borg warner direct drive gear)..46”
|
SC 925 HP
Specifications
- 572 cubic inch displacemen
- 4.500 inch stroke (Crower Crank Shaft 4340)
- 4.500 inch bore
- 9:1 compression
- 925 H.P. @ 5,700 RPM
- Super Unleaded 93 Octane
- Twin 4 Barrel 750 CFM carburetor (Holley)
- Blueprinted and balanced
- Brodix aluminum cylinder heads, fullyported & flowed
- 17 Quart cast aluminum oil pan
- Dart Block (tall deck)
- Crane hydraulic roller cam shaft & lifters
- Crane electronic ignition with built inrev-limiter
- Dual coolerbell housing
- Stainless Steel Cobra water inlets & outlets
- Race quality components and assembly
- Mooneyham 1071 Supercharger
Dimensions (without manifolds)
For Side-By-Side installation.....minimum 35” centerline
Width (head on)......................................................27”
Height (from crank shaft to flame arrestor)................37”
Height (from oil pan to carburetor)...........................47”
Length (with borg warner direct drive gear).............46”
|
