Shopping Bag

0 item(s) in cart/ total: $0    view cart
Wego 3 Wide Band Tuning Kit for Automotive applications running methanol

Wego 3 Wide Band Tuning Kit for Automotive applications running methanol

review
0
0
5
Your Price: $450.00
Part Number:112003

WEGO III Wide-Band Air/Fuel Ratio (AFR) Displays

WEGO III Wide Band Exhaust Gas Oxygen Sensor kit with methanol calibration (includes WEGO III unit with 96" harness for automotive applications, Bosch LSU 4.2 oxygen sensor, 18 X 1.5mm weld nut for exhaust pipe and software on CDROM.

The WEGO III is a stand-alone unit with built-in data logging intended for harsh environments:

  • Complete air/fuel ratio display system with built-in data logging. Includes WEGO III unit shown above, Bosch LSU4.2 5-wire wide-band oxygen sensor, 18x1.5mm weld nut for mounting sensor on exhaust pipe, and software on CDROM
  • Versatile tuning aid for all carbureted and fuel injected engines displays air/fuel ratio (AFR) and logs over 2 hours data including AFR, engine RPM, and a spare 0-5V analog input for sensors such as throttle position or manifold pressure.
  • Can be used for on-road or dyno testing.
  • Highly accurate with less than ±0.10 AFR error over 10.3 - 19.5 AFR range
  • Easy free-air calibration procedure corrects for sensor aging effects.
  • 0-5V analog AFR output for interface to dyno instrumentation.
  • Ultra-bright daylight readable blue LED display with automatic dimming under low light conditions.
  • Wide supply voltage range from 11-16V allows operation from battery on small engines or race vehicles without an alternator. Current draw is approx. 1 amp.
  • Built-in USB interface.
  • Fully encapsulated with water-proof LED display.
  • Methanol calibration
  • Compact size: 4"L x 2"W x 0.5"H.

The WEGO III is a third generation product that utilizes the proven Bosch LSU 4.2 wide-band exhaust gas oxygen sensor. By utilizing miniature surface mount electronics technology, digital signal processing techniques, and a switching power supply for the sensor heater, the WEGO III provides the same level of accuracy as lab systems costing thousands of dollars.

All WEGO systems provide quick and easy at-a-glance verification and adjustment of the sensor free-air calibration. This allows the WEGO to maintain accuracy as the sensor ages and maximizes sensor life in racing applications where the sensor may be exposed to leaded fuels.

 

By utilizing miniature surface mount electronics technology, digital signal processing techniques, and a switching power supply for the sensor heater, the WEGO III provides the same level of accuracy as lab systems costing thousands of dollars.

All WEGO systems provide quick and easy at-a-glance verification and adjustment of the sensor free-air calibration. This allows the WEGO to maintain accuracy as the sensor ages and maximizes sensor life in racing applications where the sensor may be exposed to leaded fuels.

Data Logging Software

The WEGO III features data logging and includes a built-in USB interface for easy connection to newer laptop PCs. This data logging capability greatly facilitates engine tuning and diagnosis of driveability issues. The WEGO III starts logging data once the sensors have warmed up (typically 15 seconds) and stores the last 8000 samples in non-volatile memory. This allows storage ranging from 13 minutes at 10 samples/second to over 2 hours at 1 sample/second. You can use our WEGO Log software to download and display this data on a chart recorder type screen. Available data includes air/fuel ratio (AFR), RPM, and a 0-5V analog input. The RPM input can be connected to a tachometer signal or directly driven from an ignition coil. RPM data is correctly scaled and displayed for 1-12 cylinder engines. The analog input can be connected to sensors such as throttle position or manifold pressure. Analog data can be scaled to display the correct units, such as percent throttle position or In-Hg manifold pressure.

The data logging software, WEGO Log, runs under Microsoft Windows XP/Vista/7. We no longer support older Windows versions. Minimum PC requirement is a 300 MHz Pentium with super VGA display (SVGA with 1024 x 768 pixel resolution). The WEGO III connects to the PC by means of a USB interface. A USB cable is supplied with the unit. The PC must have a free USB port. If you have an older PC without USB capability, you cannot use the WEGO III. For more detailed product information, we suggest that you download the WEGO Log software and instructions. The software download includes a sample file with actual data.

 

Related Items