With pressed-in dry sleeves, upgraded oiling and steel 4 bolt main caps, Dart's aluminum blocks have the features that Ford racers need to build reliable and affordable engines.

Features:

• Premium alloy: Dart aluminum blocks are cast from virgin 355-T61 aerospace alloy for superior strength and integrity.
  
• Siamesed cylinders: Standard 4.000" or 4.125" cylinders can be safely bored to 4.165" diameter. Ductile iron sleeves and extra thick walls prevent cracking and produce excellent ring seal.
  
• Scalloped outer water jacket walls improve coolant flow around the cylinder barrels to prevent detonation, extend engine life and produce consistent cylinder temperatures.
  
• 4 bolt billet steel main caps. Three center caps have splayed outer bolts for extra strength; rear cap uses standard one piece seal.
  
• Two main bearing diameters 302 (2.249") or 351C (2.749") allow choice of small or large journal camshaft.
  
• Provisions for stock motor mounts, accessory drives, smog pumps, starter brackets, oil pans and pumps.
  
• Upgraded oiling system has a complete stock type system plus a low restriction priority main oiling system with front and rear external oil pump feeds.
  
• Dual crossovers allow oil flow to be metered with restrictors for roller lifter cams and/or rocker roller arms to reduce oil flow and windage.
  
• Reinforced head bolt bosses are blind tapped to prevent leaks and produce accurate torque readings. Extra thick decks prevent head gasket leaks.
  
• Includes coated cam bearings, freeze plugs and dowels.
  
• Machined with front and rear external oil feed, crossover and restrictor provision.
  

Block Prep Service:
Cobra Power is a state of the art machine shop. For an additional $430 we will fully prep your block the right way. This will include:

• Honing the cylinders on our Sunnen CV616 with torque plates.
• Square decking the block.
• Check all lifter bores and hone if necessary.
• Check line hone, adjust if necessary.
• Install cam bearings, freeze plugs, hard & soft plugs
• Wash block thoroughly.

Freight:
We ship all of our engine blocks through Unishippers, We will only ship to commercial locations with loading docks and or forklift trucks. If this is not an option we can also set the freight for customer pick up at the shippers terminal. Call 305-893-5018 for an accurate shipping price.